POKEMON SLEEP PAJAMAS FREE

Use a bit of Steam a Seam fusible tape to close the hole.Mr. Press the edges of the turning hole even with the sewn edges. Remove the basting stitches from the elastic. Sew around all sides with ¼” seam allowance, leaving 1 ½” open at the top to turn it right side out. Sew a line down the middle of the elastic with the longest stitch on your machine to baste it down and keep it out of the way. Gently fold the elastic across the middle of the mask. Go back and forth over the elastic several times so it’s good and secure. RST = Right Sides Togetherįollow manufacturer’s instructions to fuse the fusible fleece to the back of one of the mask pieces.īaste the ends of the elastic to the mask front at the sides, right sides together with a 1/8 seam allowance. Steam A Seam ¼” Wide Double Stick Fusible Hem TapeĪll seam allowances ¼” unless otherwise stated.Top stitch the opening in the casing closed. Now that the elastic is sewn together in a circle, let it get pulled back into the casing. You’ll need to pull the ends pretty far out of the skirt in order to overlap them and place them under the presser foot. Stitch back and forth across the elastic several times. I use one of them to push the elastic through the casing, while the other one keeps the end of the elastic from sliding up into the casing. When I thread elastic through a casing, I put a large safety pin in each end of the elastic. Sew all the way around close to the edge to create a casing, leaving 1.5” open at the back to insert the elastic. Then press the top edge over another ¾” to the back. Sew the inseam, starting at the bottom of one leg and going up all the way around the tight curve at the crotch and then back down to the bottom of the second leg. Open and rotate the pants so the crotch seams are lined up on top of each other. Sew at both sides, from the top down to the point. Sew close to the folded edge to secure the hem. Press another ½” to the back, encasing the raw edge. Press the bottom edge of each of the pants pieces ½” to the back. But if you wait until the end with doll pants, you’ll have to sew around some very narrow circles. Normally when you sew pants, you leave the hemming until the last step.

POKEMON SLEEP PAJAMAS FREE

Free Pattern – Doll Pajama Pants and Sleep MaskĪll seam allowances are ¼” unless otherwise noted.

½” yard (or fat quarter) flannel or quilting weight cotton.

Use my free crop top tee pattern to make the pajama top. Between the sleeping bag/pillow and pajama sleep set, your child’s doll will have everything she needs for a good night’s sleep! If you use quilting cotton, you can get both pieces from one fat quarter.īe sure to also check out my tutorial to make a doll sleeping bag and pillow. For the pants and mask, you can use flannel or quilting cotton. I used white because white goes with everything. For the top, you can use a scrap of knit fabric. The sleep mask has an elastic strap and is just what doll needs to block the light so she can get her sleep.Ĭut the pants and the mask from the same fabric to make a matching set. The top has a hook and loop closure on the back so there’s no fussing with getting the doll head through the neck of the top.

No need for kids to figure out what is the front or back of the pants when putting them on the doll. The flannel pants have an elastic waistband and are the same in the front/back.

They’re also made to be easy for kids to dress the dolls. If you’ve never made doll clothes before, don’t worry. And you can use my free crop top pattern to make a t-shirt to finish out the sleep set. I’ve got a free sewing pattern below to make doll pajama pants and a sleep mask.

Kids may not like a bedtime routine for themselves, but they love getting their dolls ready for bed tucked in for a good nights sleep! And what better way for a doll to get her zzzzs than a cute pair of doll pajamas? I’ve got a free pattern you can use to make a sweet sleep set for an American Girl or other 18” dolls.

Pokemon sleep pajamas